How to Install a New Kitchen Faucet?

A kitchen without a kitchen faucet is unimaginable. It’s an essential gadget for your daily life. Replacing an old one or installing a new faucet is not that easy. You may find it quite hard to install a new kitchen faucet. You must select a faucet that is suitable for your kitchen.

You can pick wall mounted if your settings approve this. You can also choose a single handle, double handle, and pull-out faucets. If you have chosen your desired faucet already and thinking of how to install a kitchen faucet, this article going to help you definitely.

How To Install A Kitchen Faucet

Shopping before Installation

For your new kitchen, you will probably want to install a newly designed kitchen faucet.  At first, you need to buy some stuff with a new faucet. Please make sure that your selected faucet was going to meet your satisfaction. Before going to the market, check the sink’s hole and buy the faucets that will fit with your sink.

Equipment to buy:

  • Wrenches that suits the faucet
  • Screwdriver set
  • Allen Wrench

Steps on How to Install a Kitchen Faucet

You can easily install a kitchen faucet by following the steps:

Step 1: Old Faucet removing

To install the new faucet, you need to remove the old one first. Initially, you have to shut down the water valves and cut off the line. Again, your power supply should be turned off if it is electric.

Then you need to remove the nuts mounted in it with the help of a wrench. Further, you have to clean the sinkholes and the main water lines’ edge correctly.

  • Disconnect the water supply.
  • Shut down the water valves.
  • Remove the old faucet.

Step 2: Gasket Installation

Firstly, you need to attach the gasket to the sink’s hole. Then you have to feed the hose spray on the hole. Also, you should maintain an exact direction while feeding the hose spray.

A plumber’s strap may help to fill up the connections. If your faucet provides two different chambers for hot and cold water, you need to separate the hoses and remember the links.

  • Check the sink’s hole if it is clean.
  • Plugin the hose spray.
  • Attach the gasket carefully.

Step 3: Nuts and Washer Installation

To ensure the safety of your faucet, nut installation is a must. You have to check the nuts before that is correctly installed. Again you need to place the washer below the nuts.

Then, you should tighten up the bolts with the Allen wrench. If you are installing a pullout faucet, then you need to set the hose to the main supply line. Then you should pull the hose down with the help of weight.

  • Have adjustable nuts and washer.
  • Tighten them up with a suitable screwdriver.

Step 4: Double-Check the connections

Tighten up all the joints carefully. Don’t overdo it. If any connection remains loose, tighten that up with the screwdriver and wrenches. Before you connect the water supply, you should check all connections twice.

Further, you got to check the hot and cold water hoses if you set them accurately with main lines.

  • Attach all the connections carefully.
  • Check them twice before connecting the water supply.

Step 5: Connect With Water Supply

After attaching the hoses with the main supply line, you have to turn the main water supply line on along with the power. The fitting part of compression should attach correctly with the water valve. For long lines, you can bind them into loops.

Then your duty is to check the leakage. If there is any leakage, tighten up the joints and connections again. If there is no leakage found, you should switch to the final stage of how to install a kitchen faucet.

  • For longer lines, bind the pipes up in small loops.
  • Turn on the water supply.
  • Check for leakage carefully.

Step 6: Switch on The faucet Handle

Finally, you need to switch on the faucet handle and leave it for about a minute to observe the water flow rate and debris. You find the water flow satisfactorily. Then you are done!

  • Open the faucet and leave it for a few minutes.
  • Observe if the water flow is ok.

Related – Buying Guide For Faucet Water Filters 2022

Final Verdict

Many kinds of faucets are there, such as pull-out, single handle, double handle, wall-mounted, and pot filler. The installation process for all the faucets is most similar. If you are looking for a user-friendly faucet, I will suggest picking a pull-out.

You probably want to save your kitchen space; then I will recommend you to have wall-mounted faucets. Again you are thinking of using taps for pouring purposes. In this case, I will suggest you get the pot filler. Now, you know the steps of how to install kitchen faucets and which one you should choose.


Leave a comment

Your email address will not be published. Required fields are marked *